Stainless steel fireproof glass door

Installation method of fireproof glass door:

There are many kinds of fire doors, including glazed fire doors, stainless steel fire doors and ordinary steel fire doors, but the installation methods are basically the same, which should be determined according to the situation on site. Some common installation parameters must be paid attention to.

1、 The installation of fire doors shall adopt appropriate installation methods according to the type of fire doors used.

2、 The door frame of the fire door can be fixed with the wall with expansion bolts, or iron parts can be embedded at the opening when building the wall, and welded firmly with the door frame connector during installation.

3、 No matter what connection method is adopted between the door frame and the wall, there shall be no less than 3 anchor points on each side, and they shall be firmly connected.

4、 When installing the fire door, it shall be straightened and hoisted. After the size is appropriate, it shall be temporarily fixed, corrected and adjusted. It can be connected and anchored only after it is correct.

5、 The sliding door shall be flexible after installation; The swing door can be opened easily and closed tightly and firmly.

6、 A door closer must be installed on the fire door, and a sequencer must be installed on the opposite door.

7、 The handle, fire lock and other hardware accessories on the fire door must be complete;

8、 It is required that the gap with the ground plane shall not be greater than 5mm.